Skip to content
Home » Blog » speaker » How To Reset i12 Tws?

How To Reset i12 Tws?

Are you struggling to use your i12 TWS earbuds? Perhaps you’re experiencing connectivity issues or the earbuds are not responding as they should. In such situations, resetting your i12 TWS earbuds might be the solution you need.

Buy New i12 TWS Earbuds Online – Best Price

Reset i12 TWS? It only takes a few steps. First, unplug the earbuds. Press and hold the touch controls on both earphones for at least 5 seconds until the LED indications flash rapidly. Return the earbuds to their charging case to finish the reset.

In this article, we’ll walk you through the process of resetting your i12 TWS earbuds step by step.

Methods to reset i12 TWS

If you’re having trouble with your i12 TWS, resetting it can be a helpful solution. There are two ways to reset the i12 TWS – a soft reset and a hard reset. I have personally tried both methods and they have worked for me.

Soft reset method:

The soft reset is the simplest method and can be done in just a few steps. It’s recommended to try this method first before moving onto the hard reset. To perform a soft reset, follow these steps:

  1. Place the i12 TWS earbuds back into the charging case.
  2. Close the charging case and wait for at least 10 seconds.
  3. Open the charging case and remove the earbuds.
  4. Connect the earbuds to your device and check if they’re working.

Possible issues resolved through soft reset:

Hard reset method:

The hard reset is a more advanced method and should only be done if the soft reset didn’t work. To perform a hard reset, follow these steps:

  1. Place both earbuds into the charging case and leave the lid open.
  2. Press and hold the button on both earbuds for at least 10 seconds.
  3. The LED lights on both earbuds will flash white and then turn off.
  4. Remove the earbuds from the charging case and connect them to your device.

Possible issues resolved through hard reset:

Precautions to take before resetting i12 TWS

Resetting earbuds is necessary when they stop working as intended or if you’re experiencing connection problems. However, before resetting, you need to take some precautions to ensure that the reset process goes smoothly.

Charging the i12 TWS

Before you reset the i12 TWS earbuds, ensure they’re adequately charged. If your earbuds run out of charge while resetting, the reset process may be interrupted, causing problems.

Ensuring the i12 TWS is fully disconnected

Before resetting the earbuds, ensure that they’re disconnected from any connected devices. To do this, disable Bluetooth on your phone or other connected devices. Disconnecting the earbuds from any connected devices prevents them from interrupting the reset process.

Checking the manual for specific instructions

It’s always essential to read the manual before resetting your i12 TWS earbuds. The manufacturer’s manual contains specific instructions on how to reset the earbuds, which may differ from the standard reset process. Following the manual’s instructions guarantees that you reset the earbuds correctly.

Troubleshooting after resetting i12 TWS

After resetting my i12 TWS earbuds, I faced some issues while trying to connect them to my device. However, with a bit of troubleshooting, I was able to get my earbuds working again. 

In this section, I will share some common issues that you may face after resetting your i12 TWS and how to troubleshoot them.

Connecting the i12 TWS to a device

After resetting your i12 TWS, you will need to connect them to your device again. To do this, follow these steps:

  1. Make sure Bluetooth is enabled on your device.
  2. Take the earbuds out of the charging case and put them in pairing mode by holding the button on the back of both earbuds until the LED light flashes.
  3. Look for “i12 TWS” on the list of available devices and select it.
  4. Wait for the earbuds to connect.

Checking the sound quality

If you experience issues with the sound quality after resetting your i12 TWS, try the following troubleshooting steps:

  1. Ensure the earbuds are inserted correctly in your ears.
  2. Clean the earbuds’ speaker mesh and charging contacts.
  3. Adjust the volume on both the earbuds and your device.

Other common issues and solutions

If your i12 TWS still isn’t working correctly after resetting, you may need to try the following:

  1. Reset the earbuds again and try reconnecting them.
  2. Ensure that the Bluetooth on your device is on and the device is not too far away from the earbuds.
  3. Try connecting the earbuds to another device to see if the issue is with your original device.

Still Not Working? Order New i12 TWS Earbuds Online – Best Price

Maintenance tips for i12 TWS

As someone who uses i12 TWS on a daily basis, I have found that proper maintenance of the earbuds can greatly improve their longevity and overall performance. In this section, I will share my experience and tips for keeping i12 TWS in good condition.

Cleaning the i12 TWS

Regularly cleaning the earbuds can help prevent the accumulation of dirt and debris, which can negatively impact sound quality. I recommend using a soft-bristled brush or microfiber cloth to gently remove any debris from the earbuds. Be sure to avoid using any liquids, as this could damage the earbuds.

Proper Storage of the i12 TWS

When not in use, it’s important to properly store the i12 TWS to protect them from damage. I suggest using the case that comes with the earbuds to store them. This will also ensure that they are charged and ready to use when you need them.

Avoiding Exposure to Extreme Temperatures or Humidity

It’s important to keep the i12 TWS away from extreme temperatures and humidity. Exposure to high heat or cold can damage the internal components of the earbuds, while exposure to moisture can lead to corrosion. I recommend storing the earbuds in a cool, dry place when not in use.

Frequently Asked Questions (FAQs) Related to Resetting the i12 TWS Earbuds

Here are some frequently asked questions (FAQs) related to resetting the i12 TWS earbuds

Why should I reset my i12 TWS earbuds?

Resetting the earbuds can often resolve connectivity issues, poor sound quality, or other performance problems.

What is the difference between a soft reset and a hard reset?

A soft reset involves simply disconnecting the earbuds from any device and then reconnecting them. A hard reset involves holding down the buttons on the earbuds for a certain amount of time to restore them to their default settings.

How do I perform a soft reset on my i12 TWS earbuds?

To perform a soft reset, simply disconnect the earbuds from any devices and then reconnect them. Make sure to also turn off Bluetooth on any other nearby devices that may be connected to the earbuds.

How do I perform a hard reset on my i12 TWS earbuds?

o perform a hard reset, press and hold the buttons on both earbuds for at least 15 seconds until the LED lights start flashing rapidly. Then, put the earbuds back in the charging case and remove them again to complete the reset.

What precautions should I take before resetting my i12 TWS earbuds?

Make sure to fully charge the earbuds, disconnect them from any devices, and refer to the manual for specific instructions.

What should I do if resetting my i12 TWS earbuds doesn’t solve the problem?

If resetting the earbuds doesn’t solve the problem, contact customer support for further assistance.

Conclusion

As someone who has used the i12 TWS earbuds for a while now, I understand the importance of resetting them from time to time. Whether it’s due to connectivity issues, poor sound quality, or other performance problems, resetting the earbuds can often be an effective solution.

In this article, I’ve covered two methods for resetting the i12 TWS earbuds – the soft reset and hard reset methods. I’ve also discussed some precautions to take before resetting the earbuds, as well as troubleshooting tips and maintenance tips to keep the earbuds functioning at their best.

In my experience, resetting the i12 TWS earbuds has often resolved the issues I’ve encountered with them. However, it’s important to note that resetting the earbuds may not always be the solution, and in some cases, contacting customer support may be necessary.

Buy New i12 TWS Earbuds Online – Best Price

I hope you all liked the article. For more articles please visit: Rewirelessify

Leave a Reply

Your email address will not be published. Required fields are marked *